Jeigu kam idomu, kaip patikrinti purkstukus:
1)
Read the measured value blocks 72 - 77.
3 values per measured value block appear there (for 300 bar, 600 bar, 1000 bar).
Should the values be higher than minus -45 ms (example - 60ms) or
on digit 2 be
higher than minus -15 ms (e.g. 20ms),
the needle attachment is worn and the injector is incorrect. To avoid repeat repairs, replace all 6 injectors.
Observe the algebraic sign (minus) in measured value block 72-77
!!!
2)
vcds go to address 01 measured values below
013 Smooth running control
1)Cyl. 1 Injection quantity variation
[mg/stroke]
2)Cyl. 2 Injection quantity variation
[mg/stroke]
3)Cyl. 3 Injection quantity variation
[mg/stroke]
4) Vacant
Permissible values at idle: +- 2,99 mg/stroke
A If the permissible tolerance is exceeded
first check injector IQA-IVA adaption values
014 Smooth running control
1)Cyl. 4 Injection quantity variation
[mg/stroke]
2)Cyl. 5 Injection quantity variation
[mg/stroke]
3)Cyl. 6 Injection quantity variation
[mg/stroke]
4) Vacant
Permissible values at idle: +- 2,99 mg/stroke
A If the permissible tolerance is exceeded
first check injector IQA-IVA adaption values
015 Fuel consumption
1) Engine speed
[rpm]
2) Injection quantity
[mg/stroke]
3) Fuel consumption
[ltr/h]
4) Engine torque specification
[Nm] Driver input via accelerator pedal
Rodyti pranešimus
