G79 pas tave ir yra pats gazo pedalas,jo elektronika,bandyčiau ardyt ir peržiūrėt takelius,gal užsiteršę ir kažkuriuo momentu dingsta kontaktas

18047/P1639/005689 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal
Possible Symptoms
Malfunction Indicator Light (MIL) ON
Reduced Engine Output
Possible Causes
Wiring and/or connections faulty
Faulty ECM
Faulty Accelerator Pedal
Possible Solutions
Check Measuring Block Readings for Accelerator Pedal
Check Voltage Signals from ECM to Throttle Pedal (see factory repair manual)
Check Wiring and Connectors from ECM to Accelerator Pedal
Special Notes
There are 2 sensors in the accelerator pedal, both measure the same except that they are working in opposite directions. This means one counts from 0 to 100, while the other one counts from 100 to 0.
Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor(s) and it's wiring. Please verify this BEFORE replacing the ECM or Accelerator Pedal. Accelerator Pedal failure is very rare.