del garso: per slapta/antra menu reaguliuojasi isijungimo garsas, tai pas tave bus nutildyta. kuriuos mygtukus laikyt reik kad i anuos nustatymus ieit, jau nebepamenu, galesiu paieskot..
del apsvietimo, tai ryskumas pakinta tik ekrano ar ir mygtuku? kada kinta, ijungus sviesas ar visada? pas mane ir gi kartais pritemdavo ekranas pakeitus daina cd dezej , bet concertPLUS..
_________________________________________________________________________________________________________
edit:del garso:
Radio Frequency and Reception Quality Information
The following is the procedure on how to access the radio frequency auto reception quality information display.
Turn off radio.
While pressing and holding the Preset 1 button, turn on radio.
The display shows E D Fxxx where E and D depend on stereo quality of reception, and where xxx is function of the current frequency. This is a display-only mode. You cannot change any settings.
When you are done, turn off radio, then turn it back on for normal operation.
Speed-sensitive Volume Control (GALA) Information
The following is the procedure on how to access the Speed-sensitive auto-volume compensation display.
Turn off radio.
While pressing and holding the Preset 2 button, turn on radio.
The display shows how many decibels the SVC has increased the volume. This is a display-only mode. You cannot change any settings.
When you are done, turn off radio, then turn it back on for normal operation.
CD Changer Detection
The following is the procedure on how to check if the radio detects an externally mounted CD changer.
Turn off radio.
While pressing and holding the MODE button, turn on radio.
The display shows CONNECT if a CD changer is connected. Otherwise it shows NO CDC. This is a display-only mode. You cannot change any settings.
When you are done, turn off radio, then turn it back on for normal operation.
Other Preferences & Configurable Options
The following is the procedure on how to access some other preferences that you may set in the Audi Concert radio.
Turn off radio.
While pressing and holding the FM2 or TP button (whichever is appropriate for your radio version), turn on radio.
The display will show a parameter that could be adjusted.
Turn the volume control knob to change the setting.
Press the FM2 or TP button to advance to the next adjustable parameter and you can use the volume knob in the same way. Repeat this until it cycles back to the first mode.
When you are done, turn off radio, the setting will be remembered the next time the radio is turned on.
The table below shows a list of parameters that can be adjusted in this manner. Parameter Description
SVC (or GALA) Speed-sensitive Volume Control (auto-volume compensation) effect
VOL Turn-on volume setting
SENS Station-scan sensitivity (DX/LOcal)
RM Radio Monitoring (whether radio should come on
while cassette is rewinding or fast-forwarding) (OFF/ON)
NAV Navigation system audio mute amount
TA Traffic Announcement volume
The volume of traffic announcements (independent of music volume). This is applicable to radios with this capability, and operated in an area with such a service