AFN

Diesel direct injection system 
Notes 
● Work sequence see Maintenance booklet   
● Idling speed and Governed speed 
 Only check , Adjusting is a repair measure _ see 
 Workshop Manual   
Visual check 
⋆ Crankcase breather connected   
⋆ Injection pump, pipes and injectors not leaking   
⋆ Exhaust system must be free of leaks   
Test conditions 
● Electrical consumers switched off.   
● Air conditioner switched off.   
● From an engine oil temperature of min. 60 ±C warm-up engine to min. 
 10 ±C by reving-up to governed speed 
 80 times.
   
Test figures for emission check 
  Engine oil temperature min. 80 ±C   
  From an engine oil temperature of min. 60 ±C warm-up engine to min   
  10 ±C by reving-up to governed speed   
  80 times.   
  Idling speed Min. 780 rpm   
  Max. 900 rpm   
  Governed speed Min. 4800 rpm   
  Max. 5200 rpm   
  Measuring time portion 0,5 seconds   
  Measuring mode B   
  Probe number 1   
  Opacity limit 2,0 k 1/m   
Bar code for emission testing 
 
 
Engine oil capacities 
  With filter change 3,8 ltrs.