gal kas galetumet man anglu kalba sunkiai ismananciam zmogui biskiu minti pabaigt suprast ?  (v)

 Depending on which channel is defective, either one of these wire terminals can be inserted into the blank terminal opening after disassembling the connector housing to utilize the 3rd channel that wasn't being used previously.

The upper Connector on the POS that goes to the Cylinder 4 and 5 Ignition Coils also needs to have the appropriate terminal for cylinder 4 or 5 moved into the unused terminal location depending on which cylinder is being moved to the unused 3rd channel.

After the offending POS channel is identified you will end up with one 3-channel POS and one 2-channel POS. The 3- channel one goes on the right (looking at the firewall) for cylinders 1, 2, & 3, with the top & bottom harnesses plugged in normally. The 2-channel one goes on the left for cylinders 4 & 5. Swap the wires/terminals (if necessary) in the top & bottom harnesses for the left one to make sure the good 2 channels are now used; the dead one will be blank.

viskas is cia http://www.sjmautotechnik.com/trouble_shooting/S4_Ignition.htm
turiu reikalu negeru su 5 cilindru ir cia va kazkas apie tai parasyta bet nieko neikertu beveik...

google.translate.lt vis geriau nei nieko. pades suprasti bent esme, nors vertimas ten nekoks