Citata iš: boogalooo  2009  Kovo 05, 12:38:39

norejau paklaust del ratuku. ar tiks s4 93m nuo '00 eso originalus 17" 5x112 8j17h2 kodas  ?!? .. nerandu norm skaiciuokles  :/

Et tik pasitikslink jų

turetu buti atrodo 45-48

gal kas galetumet man anglu kalba sunkiai ismananciam zmogui biskiu minti pabaigt suprast ?  (v)

 Depending on which channel is defective, either one of these wire terminals can be inserted into the blank terminal opening after disassembling the connector housing to utilize the 3rd channel that wasn't being used previously.

The upper Connector on the POS that goes to the Cylinder 4 and 5 Ignition Coils also needs to have the appropriate terminal for cylinder 4 or 5 moved into the unused terminal location depending on which cylinder is being moved to the unused 3rd channel.

After the offending POS channel is identified you will end up with one 3-channel POS and one 2-channel POS. The 3- channel one goes on the right (looking at the firewall) for cylinders 1, 2, & 3, with the top & bottom harnesses plugged in normally. The 2-channel one goes on the left for cylinders 4 & 5. Swap the wires/terminals (if necessary) in the top & bottom harnesses for the left one to make sure the good 2 channels are now used; the dead one will be blank.

viskas is cia http://www.sjmautotechnik.com/trouble_shooting/S4_Ignition.htm
turiu reikalu negeru su 5 cilindru ir cia va kazkas apie tai parasyta bet nieko neikertu beveik...

gal kas galetumet man anglu kalba sunkiai ismananciam zmogui biskiu minti pabaigt suprast ?  (v)

 Depending on which channel is defective, either one of these wire terminals can be inserted into the blank terminal opening after disassembling the connector housing to utilize the 3rd channel that wasn't being used previously.

The upper Connector on the POS that goes to the Cylinder 4 and 5 Ignition Coils also needs to have the appropriate terminal for cylinder 4 or 5 moved into the unused terminal location depending on which cylinder is being moved to the unused 3rd channel.

After the offending POS channel is identified you will end up with one 3-channel POS and one 2-channel POS. The 3- channel one goes on the right (looking at the firewall) for cylinders 1, 2, & 3, with the top & bottom harnesses plugged in normally. The 2-channel one goes on the left for cylinders 4 & 5. Swap the wires/terminals (if necessary) in the top & bottom harnesses for the left one to make sure the good 2 channels are now used; the dead one will be blank.

viskas is cia http://www.sjmautotechnik.com/trouble_shooting/S4_Ignition.htm
turiu reikalu negeru su 5 cilindru ir cia va kazkas apie tai parasyta bet nieko neikertu beveik...

google.translate.lt vis geriau nei nieko. pades suprasti bent esme, nors vertimas ten nekoks

Efkito, jei ryt viskas vyks man pagal planą, tai ant vakaro išversčiau, jei tau tinka taip 

Kokios dabar kainos S4 (c4) priekiniu sparnu? Pardavineju jau daugiau nei puse metu, nieks neperka... nesenai parase sms, kiek noriu uz sparna. atrasiau, kad ~190Lt ir nieko...  Tai gal as kaina per didele uzdejes?

už s6 sparną kainos eina nuo 250 iki 350lt priklausomai nuo būklės tai dabar krizė, niekas nieko neperka, tik keitimą daro

Kuo S6 sparnas skiriasi nuo S4? Tik ta juostele, palei sparno krasta ir moldingo tvirtinimu)?
Na as irgi keiciu, bet tik i pinigus

 

faros posukis kitoks, s6 ilgesnis toks

Ot apie tai net nepagalvojau. Zdz, jei kam reiks S4 sparno, be posukio, sidabrines sp., tai zinot kur kreiptis

siaip tai bovai ir taip jau gamykliniai stovi tai pas visus turbut ir yra 

turi galvoje atmosferinius turbut ?

manau, kad yra vienas kitas ...